Carbon capture networks need pipelines, and pipeline valves are at the center of a quiet specification debate. CO2 transport looks superficially similar to natural gas transport โ large diameter, welded, block-valved โ but the differences matter at every valve on the line.
The dry-ice problem
Dense-phase CO2 operates above its critical point, but any depressurization โ including a leak at a valve seal โ flashes the fluid into a mix of gas and solid dry ice with severe cooling. Valve designs must tolerate those thermal excursions, and blowdown systems must be engineered around them. Standard gas pipeline valve specifications assume neither.
What specifiers are doing now
In the absence of a dedicated international pipeline valve code for CO2 service, project teams are writing hybrid specifications: liquid pipeline practice for fracture and toughness considerations, gas pipeline practice for isolation philosophy, and project-specific testing for the thermal and phase-change behavior that neither tradition covers. Operators with early capture projects have published their internal requirements, which function as de facto interim standards.
- Depressurization creates dry ice and severe cooling at any leak path
- Current specs blend liquid and gas pipeline practice with project-specific tests
- Early operators' internal requirements serve as interim standards
Watch this space
Standards committees on both sides of the Atlantic have CO2 transport work programs underway, and the valve sections are among the most contested. Manufacturers participating in early projects accumulate the test data and service experience that later specifications will codify โ and buyers on early projects should value that experience over lowest price, because the failure modes here are still being learned.
